Saniflo SaniPLUS: Macerating Upflush Toilet Kit (with Elongated Bowl + Extension)

SaniPLUS BENEFITS: The SaniPLUS is a system that may be used to install a complete bathroom as much as 15 feet below the sewer line, or even as much as 150 feet away from a soil stack. The SaniPLUS pump is designed to connect to: 1- This SaniPLUS Upflush Toilet 2- Any Sink 3- Any Shower 4- Any Bath SaniPLUS INSTALLATION: The SaniPLUS is simplicity itself to install; there are just four connections. 1- The macerating/pump is attached to the spigot of a horizontal outlet toilet. 2- The bathroom tank is attached to the water supply. 3- The macerating/pump is attached to the small diameter discharge pipe work. 4- The macerating/pump is attached to the electrical supply. Then optionally connect the discharge pipes from the sink, shower and/or bath. SaniPLUS FUNCTION: The inside of the SaniPLUS contains of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump. When the flush is activated, the water flowing into the SaniPLUS activates a microswitch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in oil filled enclosure. A common spindle drives the impeller and the macerator blades. The moving parts subsequently are kept to an absolute minimum. Water and organic waste matter, enter the chamber and are reduced to slurry as the macerator blades rotate at 3600 RPM. The centrifugal force causes the reduced solids to be ejected through a grill into the container where it’s picked up by the impeller pump mounted beneath the motor. The pump operates at 10 PSI and pumps the effluent upward to 12 feet and/or 150 feet horizontally. Along with The bathroom waste, SaniPLUS will also discharge gray wastewater from a lot of other sanitary fixtures, such as: a hand basin, a bath, a bidet and a urinal. SaniPLUS WARRANTY: Full 2 year manufacturer warranty for repair or replacement.